Максимально допустимі залишки ДР "Цифлутрин" в продуктах (відповідно до законодавcтва США)

Загальна інформація

МДЗ - максимально допустимі залишки.

НазваCyfluthrin
Назва українськоюЦифлутрин
МДЗДля більшості продуктів - 0.05
Більш детально дивіться в таблиці нижче.
Змінити діючу речовину

Максимально допустимі залишки в розрізі продуктів

Назва продуктуНазва продукту (англ)МДЗ (ppm)Визначено МДЗЗакінчення діїЛише для імпортуВикористання за призначенням CFRНечітко визначений продуктПримітка до продуктуВизначення залишків
ЛюцернаAlfalfa5на рівні державиAlfalfa, US Definition: Medicago sativa L. Subsp. sativa , (alfalfa, lucerne); Onobrychis viciifolia Scop . (sainfoin, holy clover, esparcet); and Lotus corniculatus L . (trefoil); and varieties and/or hybrids of these.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Люцерна, кормAlfalfa, forage5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Люцерна, сіноAlfalfa, hay13на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Мигдаль, лузгаAlmond, hulls0.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Ячмінь, висівкиBarley, bran0.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Ячмінь, зерноBarley, grain0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Цукровий бурякBeet, sugar, dried pulp1на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Цукровий буряк коренеплодиBeet, sugar, roots0.1на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Капуста, головка і качан, підгрупа 5АBrassica, head and stem, subgroup 5A2.5на рівні державиFor MRL compliance, the U.S. FDA will apply the highest established U.S. MRL for a pesticide set on Brussels sprouts, kale, and crop groups that include Brussels sprouts and/or kale. Kale sprouts are a hybrid of Brussels sprouts and kale, and are also known by the trade names Kalettes and Lollipops.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Капуста, головка і качан, підгрупа 5АBrassica, head and stem, subgroup 5A2.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Капуста, зелень, підгрупа 5ВBrassica, leafy greens, subgroup 5B7на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Капуста, зелень, підгрупа 5ВBrassica, leafy greens, subgroup 5B7на рівні державиFor MRL compliance, the U.S. FDA will apply the highest established U.S. MRL for a pesticide set on Brussels sprouts, kale, and crop groups that include Brussels sprouts and/or kale. Kale sprouts are a hybrid of Brussels sprouts and kale, and are also known by the trade names Kalettes and Lollipops.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Капуста, зелень, підгрупа 5ВBrassica, leafy greens, subgroup 5B7на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Гречка, зерноBuckwheat, grain0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Морква, корінняCarrot, roots0.2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Худоба, жирCattle, fat2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Велика рогата худоба, м'ясоCattle, meat0.1на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Велика рогата худоба, м'ясні субпродуктиCattle, meat byproducts0.1на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Цитрусові, сушена м'якотьCitrus, dried pulp0.3на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Цитрусові, оліяCitrus, oil0.3на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Польова кукурудза, зерноCorn, field, grain0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Кукурудза, зерноCorn, pop, grain0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Цукрова кукурудза, ядро ​​і качан з очищеним лушпиннямCorn, sweet, kernel plus cob with husk removed0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Бавовник, рафінована оліяCotton, refined oil2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Бавовник неочищене насінняCotton, undelinted seed1на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
ЯйцеEgg0.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
ЯйцеEgg0.01на рівні державитакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Кормові товари, що піддаються впливу інсектициду під час обробки кормових підприємств, на яких зберігаються, обробляються, готуються або подаються корми та кормові продуктиFeed commodities exposed to the insecticide during treatment of feed-handling establishments where feed and feed products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all feed processing and/or handling equipment during application. Do not apply directly to feed products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed feed or remove feed from premises. Do not apply directly to feed. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Харчові товари, що піддаються впливу інсектициду під час обробки закладів, де зберігаються, обробляються, готуються або подаються продукти харчування та харчові продуктиFood commodities exposed to the insecticide during treatment of food-handling establishments where food and food products are held, processed, prepared, or served0.05на рівні державитактакTreatments may be made by general surface, spot, and/or crack and crevice applications. General surface treatments shall be limited to a maximum of 3.8 grams of active ingredient per 1,000 square feet, applying to walls, floors, and ceilings with a low-pressure system. Cover or remove all food processing and/or handling equipment during application. Do not apply directly to food products. Reapplications may be made at 10-day intervals. Crack and crevice or spot treatments shall be limited to a maximum of 0.1 percent of the active ingredient weight, applied with a low-pressure system with a pinpoint or variable-pattern nozzle. Dust formulation shall be limited to a maximum of 0.1 percent of the active ingredient by weight, applied using a hand duster, power duster, or other equipment capable of applying dust insecticide directly into voids and cracks and crevices. Dust applications should be made in a manner to avoid deposits on exposed surfaces or introducing the material into the air. Cover exposed food or remove food from premises. Do not apply directly to food. Reapplications may be made at 10-day intervals.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate.
Цитрусові група 10Fruit, citrus, group 100.2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Цитрусові група 10Fruit, citrus, group 100.2на рівні державитакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Цитрусові група 10Fruit, citrus, group 100.2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Зерняткові плоди група 11Fruit, pome, group 110.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Кісточкові плоди, група 12Fruit, stone, group 120.3на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Кісточкові плоди, група 12Fruit, stone, group 120.3на рівні державитакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Кісточкові плоди, група 12Fruit, stone, group 120.3на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Кісточкові плоди, група 12Fruit, stone, group 120.3на рівні державитакCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Кісточкові плоди, група 12Fruit, stone, group 120.3на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Козиний жирGoat, fat2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Козине мясноGoat, meat0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Козині м'ясні субпродуктиGoat, meat byproducts0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Зерно, очищене подрібненеGrain, aspirated fractions150на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Зернові культури, фураж,ікорм для скота і сіно, група 16, солома, крім рисуGrain, cereal, forage, fodder and hay, group 16, straw, except rice7на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
ВиноградGrape1на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Виноград, родзинкиGrape, raisin3.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Свинячий, жирHog, fat0.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Свинина, м'ясоHog, meat0.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Свинина, м'ясні субпродуктиHog, meat byproducts0.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Хміль, сушені шишкиHop, dried cones20на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Конячий жирHorse, fat2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Конина м'ясоHorse, meat0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Кінь, м'ясні субпродуктиHorse, meat byproducts0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Салат, головкаLettuce, head2на рівні державиLettuce, head, US Definition: Lettuce, head; crisphead varieties only.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Салат, листLettuce, leaf3на рівні державиLettuce, leaf, US Definition: Lettuce, leaf; cos (romaine), butterhead varieties.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
МолокоMilk0.2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Молочний жирMilk, fat5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Просо, зерноMillet, grain0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Гірчиця сизаMustard greens7на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Горіхові дерева, група 14Nut, tree, group 140.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Вівсяні висівкиOat, bran0.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Овес, зерноOat, grain0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Горох і квасоля, сушені очищені, крім сої, підгрупа 6СPea and bean, dried shelled, except soybean, subgroup 6C0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Горох і квасоля, сушені очищені, крім сої, підгрупа 6СPea and bean, dried shelled, except soybean, subgroup 6C0.15на рівні державиThe US classifies chickpea in both the bean and the pea categories. For chickpea only, the highest established pea or bean tolerance will apply to pesticide residues found in this commodity.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Горох і квасоля, сушені очищені, крім сої, підгрупа 6СPea and bean, dried shelled, except soybean, subgroup 6C0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Горох сухий, насінняPea, dry, seed0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Горох сухий, насінняPea, dry, seed0.15на рівні державиThe US classifies chickpea in both the bean and the pea categories. For chickpea only, the highest established pea or bean tolerance will apply to pesticide residues found in this commodity.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Горох сухий, насінняPea, dry, seed0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Коров'ячий горох, сукулентнийPea, southern, succulent0.25на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
АрахісPeanut0.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
ПерецьPepper0.5на рівні державиPepper, US Definition: All varieties of pepper including pimento and bell, hot, and sweet pepper.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
ФісташкаPistachio0.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Домашня птиця, жирPoultry, fat0.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Домашня птися м'ясоPoultry, meat0.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Домашня птиця, м’ясні субпродуктиPoultry, meat byproducts0.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Редька, корінняRadish, roots1на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Жито, висівкиRye, bran0.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Жито, зерноRye, grain0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Овечий жирSheep, fat2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Вівці, м'ясоSheep, meat0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Вівці, м'ясні субпродуктиSheep, meat byproducts0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Сорго, зерно, зерноSorghum, grain, grain3.5на рівні державиSorghum, US Definition: Sorghum spp. [sorghum, grain, sudangrass (seed crop), and hybrids of these grown for its seed].Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Соєві боби, насінняSoybean, seed0.03на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Цукрова тростина, тростинаSugarcane, cane0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Цукрова тростина, патокаSugarcane, molasses0.2на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Соняшник, насінняSunflower, seed0.02на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Теосинте, зерноTeosinte, grain0.05на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
ТоматTomato0.2на рівні державиTomato, US Definition: Tomato, tomatillo.Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Помідор, сухі вичавкиTomato, dry pomace5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Томатна пастаTomato, paste0.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Помідор, вологі вичавкиTomato, wet pomace5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Тритикале, зерноTriticale, grain0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
ТурнепсTurnip, greens7на рівні державиTurnip, greens, US Definition: Broccoli raab (raab, raab salad), hanover salad, turnip tops (turnip greens).Cyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Гарбузові овочі, група 9Vegetable, cucurbit, group 90.1на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Плодоносні овочі група 8Vegetable, fruiting, group 80.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Листові овочі крім капусти, група 4Vegetable, leafy, except Brassica, group 46на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Бульби та бульбоцибулини, підгрупа 1СVegetable, tuberous and corm, subgroup 1C0.01на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Пшеничні висівкиWheat, bran0.5на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
Пшениця, зерноWheat, grain0.15на рівні державиCyfluthrin: Tolerances are established for residues of the insecticide cyfluthrin (cyano(4-fluoro-3-phenoxyphenyl)methyl-3-(2,2-dichloroethenyl)-2,2dimethyl-cyclopropane-carboxylate; CAS No. 68359–37–5) in or on raw agricultural commodities.
До всіх діючих речовин

Пестициди під контролем

Проект Інформаційний агрегатор "Пестициди під контролем" став можливим завдяки підтримці американського народу, наданій через Агентство США з міжнародного розвитку (USAID) у рамках Програми USAID з аграрного і сільського розвитку (АГРО), яка виконується компанією Chemonics International.

Лого USAID Лого Chemonics Лого Гранд Експерт